WGSW-52040 48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch

Physical Port

•     48-Port 10/100/1000Base-T Gigabit Ethernet RJ-45
•     4 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection
•     RJ-45 to DB9 console interface for Switch basic management and setup

IP Stacking

•     Connects with stack member via both Gigabit TP and SFP interfaces
•     Single IP address management, supports up to 24 units stacked together
•     Stacking architecture supports Chain and Ring mode

IP Routing Features

•     Supports maximum 128 static routes and route summarization

Layer 2 Features

    Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
    Supports Auto-negotiation and Half-Duplex / Full-Duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports
    Supports 100/1000Base-X for all SFP interfaces
    Auto-MDI/MDI-X detection on each RJ-45 port
    Prevents packet loss Flow Control
    - IEEE 802.3x PAUSE Frame flow control for Full-Duplex mode
    - Back-Pressure Flow Control in Half-Duplex mode
    High performance Store and Forward architecture, broadcast storm control, port loopback detect
    16K MAC address table, automatic source address learning and ageing
    Supports VLAN
    - IEEE 802.1Q Tag-based VLAN
    - GVRP for dynamic VLAN Management
    - Up to 256 VLANs groups, out of 4041 VLAN IDs
    - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    - Private VLAN Edge (PVE) supported
    - GVRP protocol for Management VLAN
    - Protocol-based VLAN
    - MAC-based VLAN
    - IP Subnet VLAN
    Supports Link Aggregation
    - Maximum 32 trunk groups, up to 8 ports per trunk group
    - IEEE 802.3ad LACP (Link Aggregation Control Protocol)
    - Cisco ether-channel (Static Trunk)
    Supports Spanning Tree Protocol
    - STP, IEEE 802.1D (Classic Spanning Tree Protocol)
    - RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
    - MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
    - Supports BPDU & root guard
    Port Mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
    Provides Port Mirror (many-to-1)

Quality of Service

    8 priority queues on all switch ports
    Supports for strict priority and WRR (Weighted Round Robin) CoS policies
    Traffic classification
    - IEEE 802.1p CoS / ToS
    - IPv4 / IPv6 DSCP
    - Port-based WRR
    Strict priority and WRR CoS policies

Multicast

•     Supports IGMP Snooping v1, v2 and v3, MLD v1 and v2 snooping
•     Querier mode support
•     Supports Multicast VLAN Register (MVR)

Security

•     IEEE 802.1x Port-based network access authentication
•     MAC-based network access authentication
•     Built-in RADIUS client to co-operate with the RADIUS servers for IPv4 and IPv6
•     TACACS+ login users access authentication
•     IP-based Access Control List (ACL)
•     MAC-based Access Control List
•     Supports DHCP Snooping
•     Supports ARP Inspection
•     IP Source Guard prevents IP spoofing attacks

Management

    Switch Management Interface
    - Console / Telnet Command Line Interface
    - Web switch management
    - SNMP v1, v2c, and v3 switch management
    - SSH/SSL secure access
    BOOTP and DHCP for IP address assignment
    Firmware upload / download via TFTP or HTTP protocol for IPv4 and IPv6
    SNTP (Simple Network Time Protocol) for IPv4 and IPv6
    User Privilege levels control
    Syslog server for IPv4 and IPv6
    Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
    Supports Ping, Trace route function for IPv4 and IPv6
    Management IP for IPv4 and IPv6